Fencing · Chain Link

Chain Link Fittings, Hardware & Safety Top Caps

Chain link fittings, hardware and safety top caps that connect fabric to posts, rails and gates, supplied by the box or by the job for fence contractors and repairs.

Fencing

About Chain Link Fittings, Hardware & Safety Top Caps

Every chain link fence depends on its fittings. These are the parts that connect the fabric to posts, rails and gates and hold the system under tension. Axiom South supplies the full range so a job is not held up by a missing band or cap.

Available chain link hardware includes tension bands, brace bands, rail ends, tie wire, tension wire, hog rings and carriage bolts, plus loop caps, dome caps and safety top caps. Fittings are sized to the framework and fabric, which commonly runs 9, 11 and 11.5 gauge in heights from 3 to 12 ft.

Ordering for a new fence or a repair? Tell us the post sizes (line, terminal and gate), fence height, coating or color, and the number of ends, corners and gates, and we can build out a complete fittings list. Quotes are itemized so you can check each line, and orders ship to all 50 states.

Chain link fittings and hardware - chain link fabric and fittings at a post, ARMA Gate
Details

Colors, sizes and specifications

Specifications
Common fabric wire gauges9, 11 and 11.5
Standard mesh2 in diamond; 1.75 in used for tennis courts
Common heights3 to 8 ft in 1 ft steps, plus 3 ft 6 in, 10 ft and 12 ft
Roll lengths (U.S.)20 ft or 50 ft
Line post spacingNo more than 10 ft
Accessories and works with
  • Tension bands
  • Brace bands
  • Rail ends
  • Tie wire
  • Tension wire
  • Hog rings
  • Carriage bolts
  • Loop caps
  • Dome caps
  • Safety top caps
Installation notes
  • Terminal posts (end, corner, gate) must be set in concrete or otherwise anchored to resist tension.
  • Stretch fabric from one terminal post to the other, then tie to line posts and rails with fence ties.
  • A bottom tension wire can limit movement at the bottom of the mesh; hog-ring the fabric to it about every 2 ft.
  • A top rail is common but optional if terminal posts are braced and a top tension wire is used; fences 10 ft or taller often add intermediate rails.
Frequently asked questions
Do I need a top rail?

Not always. A top tension wire can replace a top rail when terminal posts are braced correctly, but taller fences often add intermediate rails.

Photos

Chain Link Fittings, Hardware & Safety Top Caps photos

  • Chain link fittings and hardware - galvanized chain link post and fabric fittings, ARMA Gate
  • Chain link fittings and hardware - self-closing hinge and latch gate hardware, D&D Technologies
  • Chain link fittings and hardware - chain link gate latch hardware on a chain link fence, D&D Technologies
  • Chain link fittings and hardware - chain link gate latch hardware on a chain link fence, D&D Technologies

One product or the whole package

Order this on its own, with a few related products, or with everything else for the project. One itemized quote, shipped to all 50 states. Need someone to install it? Find an installer serving your area.

Request a quote for Chain Link Fittings, Hardware & Safety Top Caps

Send plans, measurements, or photos and we will prepare an itemized quote. You can also call us with questions.

Press Esc to close. Tip: press / to open search.